Ringer Controls; Changing The Ringer Volume; Changing The Ringer Sound - Avaya INDeX 20CC User Manual

Ringer Controls

Changing the Ringer Volume

Changing the Ringer Sound

Switching the Ringer On/Off
"Oh, noisy bells, be dumb,
I hear you, I will come"
A.E.Houseman.
38DHB0002UKCM - Issue 2 January 2000
While altering the volume, the turret rings.
To change the ringer volume:
1. Press PROGRAM and then RINGER.
2. Enter the turret's passcode (see page 33).
3. Press VOLUME. The display shows a slider. Adjust this using the -
keys on its left (softer) and right (louder).
4. Press PROGRAM to finish.
The ringer sound contains three tones. You can adjust the 'mix' of these to
achieve your own distinctive ring. While doing this the turret rings.
To change the ringer sound:
1. Press PROGRAM and then RINGER.
2. Enter the turret's passcode (see page 33).
3. Press SOUND. The display shows a slider. Adjust this using the -keys
on its left and right.
4. To select another part of the sound to adjust, press TONE. This
changes the slider to a different tone.
5. Press PROGRAM to finish.
You can switch the ringer on or off for internal and/or external calls. This does
not affect the information displayed.
For internal calls you can also select AUTO ANSWER to connect internal
calls after just a single tone. A similar feature can also be enabled for external
calls (see "Automatic External Call Connection" on page 9).
To switch the internal or external ring on/off:
1. Press PROGRAM and then RINGER.
2. Enter the turret's passcode (see page 33).
3. Press SCROLL and then press EXTERNAL or INTERNAL. The
display shows the current setting.
4. To change the ringer mode, press CHANGE to select ON, OFF or
AUTO ANSWER (internal only).
5. Press PROGRAM to finish.
Ringer Controls – Page 29
INDeX 20CC User's Guide