Turret Settings; Background Music - Avaya INDeX 20CC User Manual

Turret Settings

The Turret Passcode

Background Music

38DHB0002UKCM - Issue 2 January 2000
If the turret displays ENTER PASSCODE, it expects you to dial its four-digit
passcode. The default passcode is 0000.
Wrong passcode entry can result in the turret becoming barred. Barred turrets
cannot access features requiring passcode entry. They can make external
calls but only to special numbers, eg. emergency numbers.
To enter the turret's passcode:
1. Dial the 4-digit passcode. If you make a mistake, press CANCEL and
restart entry.
2. If you enter the wrong number, the turret displays REENTER. Enter the
passcode again or press PROGRAM to end programming.
3. If you enter the wrong passcode 5 times, the turret displays THIS
TERMINAL IS BARRED. To unbar your turret contact the System
Manager.
To change the turret's passcode:
1. Press PROGRAM, then SCROLL twice. Press PASS.
2. Enter the current passcode.
3. The display shows ENTER NEW CODE. Enter the new passcode (all
passcodes must be four digits).
– To restart after a mistake, press CANCEL.
If your system has external Music-on-Hold installed, you may be able to have
it play when the turret is not in use. The turret's speaker volume controls the
loudness of the music (see page 10), this can be adjusted for you by the
system maintainer.
To switch background music on/off:
1. Press PROGRAM and then SCROLL. Press MUSIC.
2. Enter the turret's passcode (see page 33).
3. The display shows the NO MUSIC or BACKGROUND MUSIC.
4. To change the current setting press CHANGE.
5. Press DONE to continue or press PROGRAM to finish.
Turret Settings – Page 33
INDeX 20CC User's Guide