Configure Ringer Settings; Audio/Visual Indications; Display Static Phone Information - Siemens optiPoint 410 entry Administrator's Manual

Configure Ringer Settings

Audio/Visual Indications

This setting is used to setup Alert Indications that can be used to differen-
tiate between call types.
Phone path
Parameter
(Menu ! page 148)
Alert Indications
- 11=Ringer Settings
!
page 163
- 01=Alert indications
- 01=Indication 1 up to
- 15=Indication 15
(change identifier, select
alert type and enter ringer
melody and tone)
This feature is only supported in specific system environments.

Display static Phone Information

Phone path
Parameter
(Menu ! page 148)
MAC Address
- 07=General info
!
page 202
- 1=MAC address
Application
Version - 07=General info
- 2=Version Info
!
page 225
- Application
SIP Stack
Version
- 07=General info
- 2=Version Info
!
page 217
- SIP stack
SIP Signalling
Version - 07=General info
- 2=Version Info
!
page 217
- SIP signalling
RTP Version
- 07=General info
!
page 213
- 2=Version Info
- RTP
Extended Administration
Web Interface path
(Menu ! page 110)
- Ringer Settings
(enter alert indication string and
enter melody, tone and duration)
Web Interface path
(Menu ! page 110)
- General information
(MAC address)
- General information
- Versions
(Application)
- General information
- Versions
(SIP stack)
- General information
- Versions
(SIP signalling)
- General information
- Versions
(RTP)
93