Exporting Trace Windows - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Arranging trace windows

The active Trace Monitor trace windows can be arranged as follows:

Using the key combination

Tile Horizontally

Using the key combination

Tile Vertically

Using the key combination

If the Trace windows are minimized as symbols, these can be arranged using the status bar.

For this, select the Arrange Icons entry in the menu window.

Exporting Trace Windows

Each trace window has a capacity of 1,000 (for the Server PC under Windows 95/98) or 5,000

entries (for the Server PC under Windows NT or Windows 2000). When this capacity is

reached, the oldest entry is deleted from the trace window for each new entry.

To document a current situation from a trace window, you can save the current status of a trace

window to a swap file.

The Write Messages to File entry should be selected via the system menu or, alternative-

ly, the context menu (right-click in the Trace window) of the relevant Trace window.

A message box containing the path and file name of the swap file for the trace window ap-

Confirm the message with OK.

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

or via the Cascade entry in the menu window.

or via the Tile Horizontally entry in the menu

or via the Tile Vertically entry in the menu win-

Guided Maintenance

Table of Contents

Hipath 3000 Hipath 3800