D. Verifying the Machines Network Settings
1. Press Utility\Counter button.
2. Press [Administrator Setting]. Enter
administrator password, as required.
3. Press [Network Setting].
4. Press [Machine Nic Setting].
5. Press OK.
Note:
If changes are made to the Network
settings it is necessary to cycle power by
turning off SW2 and SW1. Wait 15
seconds before powering on the MFP.
Then wait until the MFP comes to a full
ready.
E. Entering the User Name and Password in HTTP Settings
1. Press Utility\Counter button.
2. Press [Administrator Setting]. Enter administrator password, as required.
3. Press [Network Setting]
4. Press [HTTP Communication
Setting]
5. Press [Enable Authentication] and
set to ON. Press OK to exit this
screen
6. Enter Authentication User Name:
WebDav Account name provided
by the vCare Administrator.
7. Enter Authentication Password:
WebDav Password provided by the
vCare Administrator.
8. Enable [Proxy Server], [Proxy Server Address Set], [Proxy Server Port] and/or
[Enable SSL] as required
Konica Minolta bizhub PRESS C8000 Main Body bizhub vCare HTTP Setup Guide
Page 4 of 21