Suzuki drz 400E Service Manual page 211

7-18 ELECTRICAL SYSTEM
Measure the ignition coil primary peak
voltage.
( 7-19)
NOTE: The ignition coil peak voltage
inspection method is applicable only with the
multi circuit tester and the peak volt adaptor.
Incorrect
Inspect the ignition coil.
Correct
Measure the pickup coil and signal coil peak
voltage and resistance. (
NOTE: The pickup coil and signal coil peak
voltage inspection is applicable only with the
multi circuit tester and the peak volt adaptor.
Correct
( 7-20)
7-20 and 7-21)
Inspect the spark plug.
Correct
(
• Improper spark plug
connection
Incorrect
• Faulty ignition coil
Incorrect
• Faulty pickup coil
• Faulty signal coil
• Faulty CDI unit
• Open circuit in wiring
• Improper ignition coupler
2-9)
Correct Incorrect
• Faulty spark plug
harness.
connection