Rear Shock Absorber Damping Force Adjustment - Suzuki drz 400E Service Manual

Tighten the rear shock absorber upper and lower mounting
nut to the specified torque.
Rear shock absorber upper and lower mounting nut:
Apply THREAD LOCK SUPER "1303" to the seat rail lower
mounting bolt 4.
99000-32030: THREAD LOCK SUPER "1303"
Tighten the seat rail upper mounting nut 3 and lower mount-
ing bolts 4 to the specified torque.
Seat rail upper mounting nut:
Seat rail lower mounting bolt:
REAR SHOCK ABSORBER DAMPING
FORCE ADJUSTMENT
After installing the rear suspension, adjust the rebound damp-
ing force and compression damping force as follows.
Fully turn the damping adjuster clockwise to the hard setting
position, and then turn it out to the standard setting position.
Standard setting position:
Compression damping force adjuster A:
Rebound damping force adjuster B:
55 N·m (5.5 kgf-m, 40.0 lb-ft)
35 N·m (3.5 kgf-m, 25.5 lb-ft)
35 N·m (3.5 kgf-m, 25.5 lb-ft)
12 clicks out
13 clicks out
CHASSIS
3
4
A
B
6-39