Suzuki drz 400E Service Manual page 184

When remounting the master cylinder on the handlebar, align
the master cylinder holder's mating surface 1 with the punch
mark 2 on the handlebar, and then tighten the upper clamp
bolt first.
Master cylinder clamp bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
A Master cylinder
B Master cylinder upper clamp bolt
C Handlebar
D Clearance
Tighten the brake hose union bolt to the specified torque.
Brake hose union bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Bleed air from the brake system after reassembling the
master cylinder. ( 2-19 and 2-20)
CHASSIS 6-53
2
1