Removal And Disassembly - Suzuki drz 400E Service Manual

REMOVAL AND DISASSEMBLY

Remove the front wheel. (
Remove the front brake caliper. (
Remove the headlight assembly. (
Remove the brake hose clamp 1 and odometer cable
guide 2.
Remove the front fork after loosening the front fork upper clamp
bolts 3 and lower clamp bolts 4.
NOTE:
Slightly loosen the front fork cap bolt 5 to facilitate later disas-
sembly.
Remove the boot.
Replace the removed boot clamps with new ones.
Remove the cap bolt out of the inner tube and slowly pull
down the inner tube.
Hold the piston rod locknut with a 17-mm wrench and special
tool.
Remove the cap bolt, washer, and spring.
09940-94922: Front fork stopper plate
6-5)
6-47)
7-27)
CHASSIS
1
2
5
3
4
6-11