2 ] Paper/Document Feeding Problems - Brother DCP130C Service Manual

[ 2 ] Paper/document feeding problems
Problem
(1) The "ADF Ready" message
does not appear although
documents are set.*
(2) Document not fed.*
(3) Document double feeding*
(4) Document jam*
(5) Recording paper not fed.
(6) Recording paper jam
• Sensors by using Function code 32 in the maintenance mode
(Refer to Chapter 9, Section
• Document front sensor actuator
• Document front sensor PCB
• Main PCB
• ADF and its related sections
• Foreign materials in the document path
• ADF motor and its harness
• Document feed rollers and their related gears
• Document front and rear sensor PCBs
• Main PCB
• ADF parts
• Document rear sensor actuator
• Foreign materials in the document path
• Sensors by using Function code 32 in the maintenance mode
(Refer to Chapter 9, Section
• ADF motor
• Main PCB
• Paper pull-in roller holder
• Base pad in the paper tray
• Jam clear cover
• PF-related gears
• Main PCB
• Paper feed motor
• Paper feeding mechanism
• Foreign materials in the paper path
• Check that the carriage-head flat cable is connected to the
carriage PCB.
• Carriage PCB
• Main PCB
4 - 2 0
Check:
9.4.8.)
9.4.8.)
*For models with ADF
Confidential