Quick Commissioning With A Pc; Creating A Project - Siemens SINAMICS G120D Operating Instructions Manual

Commissioning

5.4 Quick commissioning with a PC

5.4 Quick commissioning with a PC
The screen forms that are shown in this manual show generally valid examples. The number
of setting options available in screen forms depends on the particular inverter type.
Requirements
To be able to perform quick commissioning using a PC, you need to do the following:

1. Creating a project

2. Integrating the inverter into the project
3. Go online and start the quick commissioning
5.4.1 Creating a project
Creating a project
Procedure
In order to create a new project, proceed as follows:
1. In the menu, select "Project" → "New...".
2. Specify a name of your choice for the project.
You have created a new project.
90
Operating Instructions, 07/2016, FW V4.7 SP6, A5E34262100B AD
Converter with control units CU240D-2