Ipv6 Mce Configuration Example - HP 6127xlg Configuration Manual

Task
Display information about a
specified VPN instance or all VPN
instances.
Display BGP peer group information
for a VPN instance.
Display BGP peer information for a
VPN instance.
For commands that display information about a routing table, see Layer 3—IP Routing Command
Reference.
For more information about the display bgp group and display bgp peer commands, see Layer 3—IP
Routing Command Reference.

IPv6 MCE configuration example

Network requirements
As shown in
VPNs and advertise VPN routes to PE 1 through OSPFv3.
Figure 1 12, RIPng runs in VPN 2. Configure the MCE device to separate routes from different
Command
display ip vpn-instance [ instance-name vpn-instance-name ]
display bgp group ipv6 [ unicast ] vpn-instance vpn-instance-name
[ group-name group-name ]
display bgp peer ipv6 [ unicast ] vpn-instance vpn-instance-name
[ ipv6-address prefix-length | { ipv6-address | group-name
group-name } log-info | [ [ ipv6-address ] verbose ] [ standby slot
slot-number ] ]
470