HP 6127xlg Configuration Manual page 116

# Execute the display mpls te tunnel-interface command on Switch D to display detailed information
about the MPLS TE tunnel.
[SwitchD] display mpls te tunnel-interface
[SwitchD] display mpls te tunnel-interface
Tunnel Name
Tunnel State
Tunnel Attributes
LSP ID
Admin State
Ingress LSR ID
Signaling
Resv Style
Tunnel mode
Reverse-LSP name
Reverse-LSP LSR ID
Class Type
Reserved Bandwidth
Setup Priority
Affinity Attr/Mask
Explicit Path
Backup Explicit Path : -
Metric Type
Record Route
FRR Flag
Backup Bandwidth Flag: -
Backup Bandwidth
Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Execute the display mpls lsp verbose command on Switch D to display detailed information about the
bidirectional MPLS TE tunnel.
[SwitchD] display mpls lsp verbose
Destination : 4.4.4.9
FEC : 1.1.1.9/1/30478
Protocol : RSVP
LSR Type : Egress
Service : -
In-Label : 3
State : Active
Nexthop : 127.0.0.1
Out-Interface: -
Destination : 4.4.4.9
: Tunnel 4
: Up (Main CRLSP up, Reverse CRLSP up)
:
: - Tunnel ID
: Normal
: - Egress LSR ID
: RSVP-TE Static CRLSP Name
: FF
: Co-routed, passive
: -
: 1.1.1.9 Reverse-LSP Tunnel ID: 1
: - Tunnel Bandwidth
: -
: - Holding Priority
: -/-
: -
: -
: - Record Label
: - Bandwidth Protection : -
Backup Bandwidth Type: -
: -
: - Auto Created
: -
: - Retry Interval
: - Reoptimization Freq
: - Backup LSP ID
: - Auto Bandwidth Freq
: - Max Bandwidth
: -
107
: 8
: -
: -
: -
: -
: -
: No
: -
: -
: -
: -
: -