HP 6127xlg Configuration Manual page 342

Step
9. (Optional.) Configure the router
as a route reflector and specify a
peer or peer group as its client.
10. (Optional.) Enable L2VPN
information reflection between
clients.
11. (Optional.) Configure the cluster
ID of the route reflector.
12. (Optional.) Configure the
filtering of reflected L2VPN
information.
13. (Optional.) Return to user view.
14. (Optional.) Soft-reset L2VPN
BGP sessions.
15. (Optional.) Reset L2VPN BGP
sessions.
For more information about the peer as-number, peer enable, peer allow-as-loop, peer reflect-client,
reflect between-clients, reflector cluster-id, refresh bgp, and reset bgp commands, see Layer 3—IP
Routing Command Reference.
Creating a BGP PW
Step
1. Enter system view.
2. Enter cross-connect group
view.
3. Configure the cross-connect
group to automatically
discover neighbors and
create PWs through BGP and
enter auto-discovery
cross-connect group view.
4. Configure an RD for the
cross-connect group.
5. Configure route targets for the
cross-connect group.
6. (Optional.) Reference a PW
class.
7. (Optional.) Set an MTU for the
PW.
Command
peer { group-name | ip-address
[ mask-length ] } reflect-client
reflect between-clients
reflector cluster-id { cluster-id |
ip-address }
rr-filter extended-community-number
return
refresh bgp { ip-address
[ mask-length ] | all | external |
group group-name | internal }
{ export | import } l2vpn
reset bgp { as-number | ip-address
[ mask-length ] | all | external |
group group-name | internal } l2vpn
Command
system-view
xconnect-group group-name
auto-discovery bgp
route-distinguisher
route-distinguisher
vpn-target vpn-target&<1-8> [ both
| export-extcommunity |
import-extcommunity ]
pw-class class-name
mtu mtu
333
Remarks
By default, no route reflector
or client is configured.
By default, L2VPN
information reflection is
enabled between clients.
By default, a route reflector
uses its own router ID as the
cluster ID.
By default, the route reflector
does not filter reflected
L2VPN information.
N/A
N/A
N/A
Remarks
N/A
N/A
By default, a cross-connect group
does not automatically discover
neighbors or create PWs through
BGP.
By default, no RD is configured for
the cross-connect group.
By default, no route targets are
configured for the cross-connect
group.
By default, no PW class is
referenced.
The default MTU is 1500 bytes.