Displaying And Maintaining Ipv6 Mce; Ipv6 Mce Configuration Example - HP FlexFabric 5700 Configuration Manual

Step
8. (Optional.) Configure
filtering of advertised
routes.
9. (Optional.) Configure
filtering of received
routes.

Displaying and maintaining IPv6 MCE

Execute display commands in any view.
Task
Display information about a
specified VPN instance or all VPN
instances.
Display BGP peer group
information for a VPN instance.
Display BGP peer information for a
VPN instance.
For commands that display information about a routing table, see Layer 3—IP Routing Command
Reference.
For more information about the display bgp group and display bgp peer commands, see Layer
3—IP Routing Command Reference.

IPv6 MCE configuration example

Network requirements
As shown in
different VPNs and advertise VPN routes to PE 1 through OSPFv3.
Command
filter-policy acl6-number export [ protocol
process-id ]
filter-policy acl6-number import
Figure 6, RIPng runs in VPN 2. Configure the MCE device to separate routes from
Command
display ip vpn-instance [ instance-name vpn-instance-name ]
display bgp group ipv6 [ unicast ] vpn-instance
vpn-instance-name [ group-name group-name ]
display bgp peer ipv6 [ unicast ] vpn-instance vpn-instance-name
[ ipv6-address prefix-length | { ipv6-address | group-name
group-name } log-info | [ [ ipv6-address ] verbose ] [ standby slot
slot-number ] ]
35
Remarks
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.