HP 6127xlg Configuration Manual page 61

Blade switch series

Hide thumbs Also See for 6127xlg:

Table of Contents

[SwitchA] mpls ldp

[SwitchA-mpls-ldp] quit

[SwitchA] interface vlan-interface 12

[SwitchA-Vlan-interface12] mpls enable

[SwitchA-Vlan-interface12] mpls ldp enable

[SwitchA-Vlan-interface12] quit

[SwitchA] interface vlan-interface 24

[SwitchA-Vlan-interface24] mpls enable

[SwitchA-Vlan-interface24] mpls ldp enable

[SwitchA-Vlan-interface24] quit

Configure LSP generation policies so LDP using all static routes and IGP routes to establish LSPs:

# Configure Switch S.

[SwitchS] mpls ldp

[SwitchS-ldp] lsp-trigger all

[SwitchS-ldp] quit

# Configure Switch D.

[SwitchD] mpls ldp

[SwitchD-ldp] lsp-trigger all

[SwitchD-ldp] quit

# Configure Switch A.

[SwitchA] mpls ldp

[SwitchA-ldp] lsp-trigger all

[SwitchA-ldp] quit

Verifying the configuration

# Verify that primary and backup LSPs have been established on Switch S.

[SwitchS] display mpls ldp lsp 21.1.1.0 24

Status Flags: * - stale, L - liberal, B - backup

Ingress LSPs: 2

In/Out Label

Transit LSPs: 2

Egress LSPs: 0

OutInterface

Show Quick Links

Table of Contents