HP 6127xlg Configuration Manual page 132

Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Execute the display mpls lsp command on Switch B. The output shows that the current bypass tunnel
that protects the primary CRLSP is Tunnel 50.
[SwitchB] display mpls lsp
FEC
2.2.2.2/51/16802
2.2.2.2/1/16802
Backup
2.2.2.2/50/16802
3.2.1.2
3.3.1.2
# Execute the display rsvp lsp verbose command on Switch A to display detailed information about
MPLS TE tunnel 1, the tunnel for the primary CRLSP. The output shows that Tunnel1 is protected by the
bypass tunnel Tunnel 50, and the protected node is 3.1.1.1.
[SwitchA] display rsvp lsp tunnel-id 1 verbose
Tunnel name: Tunnel1
Destination: 4.4.4.4
Tunnel ID: 1
LSR type: Ingress
Setup priority: 7
In-Label: -
In-Interface: -
Nexthop: 2.1.1.2
Include-Any: 0
Average bitrate: 0 kbps
Path MTU: 1500
RRO number: 12
2.1.1.1/32
2.1.1.2/32
1150
2.2.2.2/32
3.1.1.1/32
3.1.1.2/32
1151
3.3.3.3/32
4.1.1.1/32
4.1.1.2/32
3
4.4.4.4/32
Fast Reroute protection: Ready
FRR inner label: 3
: Disabled
: -
: -
Proto In/Out Label
RSVP -/3
RSVP -/1151
-/3
RSVP -/3
Local -/-
Local -/-
Flag: 0x00 (No FRR)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Flag: 0x09 (FRR Avail/Node-Prot)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Flag: 0x00 (No FRR)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Bypass tunnel: Tunnel50
123
Auto Bandwidth Freq
Max Bandwidth
Interface/Out NHLFE
Vlan4
Vlan2
Tun50
Vlan6
Vlan6
Vlan6
Source: 1.1.1.1
LSP ID: 16802
Direction: Unidirectional
Holding priority: 7
Out-Label: 1150
Out-Interface: Vlan1
Exclude-any: 0
Include-all: 0
Maximum burst: 1000.00 bytes
Class type: CT0
: -
: -