Displaying And Maintaining Mpls L2Vpn - HP 6127xlg Configuration Manual

Step
4. Set the MAC address
learning limit on the
interface.

Displaying and maintaining MPLS L2VPN

Execute display commands in any view and reset commands in user view.
Task
Display LDP PW label information.
Display cross-connect forwarding
information.
Display L2VPN PW information.
Display PW class information.
Display Ethernet service instance
information.
Display cross-connect group information.
Display L2VPN label block information.
Display BGP L2VPN peer group
information.
Display L2VPN label block information
discovered by BGP.
Display BGP L2VPN peer information.
Display BGP L2VPN update group
information.
Reset BGP sessions for L2VPN.
For more information about the display bgp group l2vpn, display bgp peer l2vpn, display bgp
update-group l2vpn, and reset bgp commands, see Layer 3—IP Routing Command Reference.
Command
mac-address max-mac-count count
Command
display l2vpn ldp [ peer ip-address [ pw-id pw-id ] |
xconnect-group group-name ] [ verbose ]
display l2vpn forwarding { ac | pw } [ xconnect-group
group-name ] [ slot slot-number ] [ verbose ]
display l2vpn pw [ xconnect-group group-name ] [ ldp | static ]
[ verbose ]
display l2vpn pw-class [ class-name ]
display l2vpn service-instance [ interface interface-type
interface-number [ service-instance instance-id ] ] [ verbose ]
display l2vpn xconnect-group [ name group-name ] [ verbose ]
display l2vpn bgp [ peer ip-address | local ] [ xconnect-group
group-name ] [ verbose ]
display bgp group l2vpn [ group-name group-name ]
display bgp l2vpn signaling [ peer ip-address { advertised |
received } [ statistics ] | route-distinguisher route-distinguisher
[ site-id site-id [ label-offset label-offset [ advertise-info ] ] ] |
statistics ]
display bgp peer l2vpn [ ip-address mask-length | { ip-address |
group-name group-name } log-info | [ [ ip-address ] verbose ]
[ standby slot slot-number ] ]
display bgp update-group l2vpn [ ip-address ]
reset bgp { as-number | ip-address [ mask-length ] | all | external
| group group-name | internal } l2vpn
338
Remarks
By default, the MAC address
learning limit is not set.
Layer 2 aggregate interfaces do
not support this command.
For more information about this
command, see Layer 2—LAN
Switching Command Reference.