HP 6127xlg Configuration Manual page 364

Figure 91 Network diagram
Table 33 Interface and IP address assignment
Device
CE 1
PE 1
CE 2
Configuration procedure
Before you perform the following configurations, configure VLANs and add ports to VLANs.
1. Configure CE 1.
<CE1> system-view
[CE1] interface vlan-interface 10
[CE1-Vlan-interface10] ip address 100.1.1.1 24
[CE1-Vlan-interface10] quit
2. Configure PE 1:
# Configure an LSR ID.
<PE1> system-view
[PE1] interface loopback 0
[PE1-LoopBack0] ip address 1.1.1.1 32
[PE1-LoopBack0] quit
[PE1] mpls lsr-id 1.1.1.1
# Enable global MPLS LDP.
[PE1] mpls ldp
[PE1-ldp] quit
Interface IP address
Vlan-int10 100.1.1.1/24
Loop0 1.1.1.1/32
Vlan-int10 -
Vlan-int12 12.1.1.1/24
Vlan-int13 13.1.1.1/24
Vlan-int10 100.1.1.2/24
Device Interface
PE 2 Loop0
Vlan-int10
Vlan-int12
PE 3 Loop0
Vlan-int10
Vlan-int13
355
IP address
2.2.2.2/32
-
12.1.1.2/24
3.3.3.3/32
-
13.1.1.3/24