Manually perform a PW switchover.
•
Configuring static PW redundancy
Step
1.
Enter system view.
2.
Enter cross-connect group
view.
3.
Enter cross-connect view.
4.
(Optional.) Specify whether
to switch traffic from the
backup PW to the primary
PW when the primary PW
recovers, and set the wait
time for the switchover.
5.
Enter cross-connect PW view.
6.
Configure a backup
cross-connect PW and enter
backup cross-connect PW
view.
7.
Return to user view.
8.
Manually perform a PW
switchover.
Configuring LDP PW redundancy
Step
1.
Enter system view.
2.
Enter cross-connect group
view.
3.
Enter cross-connect view.
4.
(Optional.) Specify whether
to switch traffic from the
backup PW to the primary
PW when the primary PW
recovers, and set the wait
time for the switchover.
5.
Enter cross-connect PW view.
Command
system-view
xconnect-group group-name
connection connection-name
revertive { wtr wtr-time | never }
peer ip-address pw-id pw-id
[ in-label label-value out-label
label-value ] [ pw-class class-name
| tunnel-policy tunnel-policy-name ]
*
backup-peer ip-address pw-id
pw-id in-label label-value out-label
label-value [ pw-class class-name |
tunnel-policy tunnel-policy-name ] *
return
l2vpn switchover peer ip-address
pw-id pw-id
Command
system-view
xconnect-group group-name
connection connection-name
revertive { wtr wtr-time | never }
peer ip-address pw-id pw-id
[ pw-class class-name |
tunnel-policy tunnel-policy-name ] *
336
Remarks
N/A
N/A
N/A
By default, traffic is immediately
switched back from the backup
PW to the primary PW when the
primary PW recovers.
N/A
By default, no backup PW is
configured.
N/A
N/A
Remarks
N/A
N/A
N/A
By default, traffic is immediately
switched back from the backup
PW to the primary PW when the
primary PW recovers.
N/A