Configuring Ldp Pw Redundancy; Enabling Snmp Notifications For L2Vpn Pw; Displaying And Maintaining Mpls L2Vpn - HP FlexNetwork 10500 Series Configuration Manual

Configuring LDP PW redundancy

Step
1. Enter system view.
2. Enter cross-connect group
view.
3. Enter cross-connect view.
4. (Optional.) Specify the
switchover mode and set the
wait time for the switchover.
5. Enter cross-connect PW
view.
6. Configure a backup LDP PW
and enter backup
cross-connect PW view.
7. Return to user view.
8. Manually switch traffic to the
backup PW of the PW.

Enabling SNMP notifications for L2VPN PW

This feature enables L2VPN to generate SNMP notifications when PW deletions, PW switchovers, or
PW status changes occur. For L2VPN event notifications to be sent correctly, you must also
configure SNMP on the device. For more information about SNMP configuration, see the network
management and monitoring configuration guide for the device.
To enable SNMP notifications for L2VPN PW:
Step
1. Enter system view.
2. Enable SNMP notifications
for L2VPN PW.

Displaying and maintaining MPLS L2VPN

Execute display commands in any view and reset commands in user view.
Task
Display LDP PW label information.
(In standalone mode.) Display
cross-connect forwarding
information.
Command
system-view
xconnect-group group-name
connection connection-name
revertive { wtr wtr-time | never }
peer ip-address pw-id pw-id
[ pw-class class-name |
tunnel-policy
tunnel-policy-name ] *
backup-peer ip-address pw-id
pw-id [ pw-class class-name |
tunnel-policy
tunnel-policy-name ] *
return
l2vpn switchover peer
ip-address pw-id pw-id
Command
system-view
snmp-agent trap enable l2vpn
[ pw-delete | pw-switch |
pw-up-down ] *
Command
display l2vpn ldp [ peer ip-address [ pw-id pw-id ] |
xconnect-group group-name ] [ verbose ]
display l2vpn forwarding { ac | pw } [ xconnect-group
group-name ] [ slot slot-number ] [ verbose ]
338
Remarks
N/A
N/A
N/A
By default, the switchover mode is
revertive and the switchover wait
time is 0 seconds.
N/A
By default, no backup LDP PW
exists.
N/A
N/A
Remarks
N/A
By default, SNMP notifications for
L2VPN PW are disabled.