Table of Contents
Advertisement
CYLINDER HEAD AND CYLINDER
REMOVAL
1. Remove:
•
•
•
•
NOTE:
•
Before removing the piston pin clip, cover the
SCH5100
crankcase with a clean rag so that you will not
accidentally drop the clip into the crankcase.
•
Before removing the piston pin, deburr the clip
groove and pin hole area. If the piston pin groove
is deburred and the piston pin is still difficult to
remove, use the piston pin puller.
•
Put identification marks on each piston head for
reference during reinstallation.
CAUTION:
Do not use a hammer to drive out the piston pin
out.
1
Piston pin
2
Piston
3
Piston pin puller
SCH5110
5-8
ENG
Piston pin clip
Piston pin
Piston
Small end bearing
Piston pin puller:
90890-01304, YU-01304
Hide quick links:
Advertisement
Table of Contents
