Yamaha VT700F Service Manual page 318

1
ENGINE ASSEMBLY
INSPECTION
1. Inspect:
•
Rear bracket (right) 1
Cracks/damage → Replace.
SCH5050
INSTALLATION
NOTE:
After installing all parts, refer to "CABLE ROUTING"
in CHAPTER 9, to check the cable, lead and hose
routings.
1. Fasten:
SCH5060
•
Plastic band 1
NOTE:
•
Fasten the carburetor heating hose 3 2 without
squashing it.
•
Clamp the starter motor lead 3 and carburetor
heating hose 3 2 together so that the white tape on
the starter motor lead 3 is positioned behind the
front bracket.
2. Install:
SCH5070
•
Starter motor lead 1 (VX700DX/VT700)
NOTE:
Route the starter motor lead as shown in the illustra-
tion.
5-4
ENG