Yamaha VT700F Service Manual page 276

a
SCH4720
INSPECTION
1. Inspect:
•
Master cylinder 1
Wear/scratches → Replace the master cylin-
der assembly.
•
Master cylinder body 2
Cracks/damage → Replace.
•
Oil delivery passage (master cylinder body)
Blow out with compressed air.
SCH4700
2. Inspect:
•
Master cylinder kit 1
Scratches/wear/damage → Replace as a set.
SCH4710
BRAKE MASTER CYLINDER ASSEMBLY
WARNING
•
All internal parts should be cleaned only with
new brake fluid.
•
Internal parts should be lubricated with brake
fluid when installed.
Recommended brake fluid:
•
Replace the piston seals and dust seals when-
ever a caliper is disassembled.
INSTALLATION
1. Connect:
•
Brake hose
NOTE:
Install the brake hose with the mark a facing up-
wards, as shown in the diagram.
Brake hose joint:
4-37
POWR
BRAKE
TR
DOT 4
Brake master cylinder side
14 Nm (1.4 m · kg, 10 ft · lb)
Brake hose side
30 Nm (3.0 m · kg, 22 ft · lb)