D.4 Condensed Status - Emerson Rosemount 3051 Reference Manual

Reference Manual
00809-0100-4797, Rev DA
Table D-3. Analog input Block Parameters
Index Parameter name
31 HI_ALM
32 LO_ALM
33 LO_LO_ALM
34 SIMULATE
1. If blank, parameter is not applicable to LOI.
D.4 Condensed status
The Rosemount 3051 device utilizes condensed status as recommended by the Profile 3.02
specification and NE 107. Condensed status has some additional bits and changed bit
assignments from classic status. Confirm bit assignment using
Table D-4. Diagnosis Descriptions
Table D-5. Output Status Bit Definition
Bad - passivated
Bad, maintenance alarm, more diagnostics available
Bad, process related - no maintenance
Uncertain, substitute set
Uncertain, process related, no maintenance
Good, ok
Good, update event
Good, advisory alarm, low limit
Good, advisory alarm, high limit
Good, critical alarm, low limit
Good, critical alarm, high limit
Good, function check
®
PROFIBUS Block Information
LOI
DTM name
location
Upper Limit
N/A
Warning
Lower Limit
N/A
Warning
Lower Limit
N/A
Alarm
Simulation N/A
Device related diagnosis
Byte-Bit
2-4
2-3
3-2
3-0
4-7
Description
PROFIBUS
Definition
(1)
The HI alarm data
The LO alarm data.
The LO LO alarm data.
A group of data that contains the simulated transducer
value and status, and the enable/disable bit.
Unit_Diag_Bit
36
35
42
40
55
®
Block Information
August 2016
Table D-4 and Table D-5.
Diagnostic description
Cold Start
Warm Start
Function Check
Maintenance Alarm
More Information Available
HEX DECIMAL
0x23 35
0x24 36
0x28 40
0x4B 75
0x78 120
0x80 128
0x84 132
0x89 137
0x8A 138
0x8D 141
0x8E 142
0xBC 188
185