20. Not available with Alloy C-276 isolator (option code 3), assemble-to manifolds (option code S5), assemble-to seals (option code S1), surface finish

certification (option code Q16), and remote seal system report (option code QZ).

21. Only available with product certifications E7, E8, I1, I7, IA, K7, K8, KD, N1, N7.

22. Contact an Emerson Process Management representative for availability.

23. Only available with HART 4-20 mA output (output code A).

24. Only available with HART 4-20 mA output (output code A) and Wireless output (output code X).

25. Not available with F

OUNDATION

26. Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.

27. The T1 option is not needed with FISCO product certifications; transient protection is included in the FISCO product certification codes IA, IB, and IE.

28. Not valid with alternate process connection S5.

29. The V5 option is not needed with T1 option; external ground screw assembly is included with the T1 option.

30. NACE compliant wetted materials are identified by

Specifications and Reference Data

Fieldbus (output code F) and Wireless output (output code X) or Low Power (output code M).

Footnote

10.

Specifications and Reference Data

August 2016

Table of Contents