Konica Minolta bizhub C550 User Manual page 201

Basic copy operations
If a Punch setting is to be selected, select the orientation in which the
document is positioned. If an Original Direction setting is not selected,
holes may not be punched in the copies as desired.
For details on specifying the document orientation, refer to "Selecting the
document orientation (Original Direction settings)" on page 2-29.
Note
The Punch settings are available only if the punch kit or Z folding unit is
installed with the optional finisher.
The number of punched holes differs depending on the country (region)
where the unit is installed. For details, consult your service representa-
tive.
Tray
Finishing
Tray 1
* There are five Foolscap sizes: 220 × 330 mm w, 8-1/2 × 13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w,
and 8 × 13 w. Any one of these sizes can be selected. For details, contact your service repre-
sentative.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
C550
Paper weight
2 2
64 g/m to 128 g/m
Paper size
"2-Hole" Punch setting:
A3 w to A5 v/w, 11 × 17 w to 5-1/2 × 8-1/2 w,
8 × 13w*, 8K w, 16K v/w
"3-Hole"/"4-Hole" Punch setting:
A3 w, B4 w, A4 v, B5 v, 11 × 17 w, 8-1/2 × 11 v,
7-1/4 × 10-1/2 v, 8K w, 16K v
2
2-90