Utility mode
–
If the folding position is too far to the right of the center of the paper,
touch [-] to reduce the adjustment (between -0.1 mm and -12.8
mm).
8
Touch [OK].
–
To cancel the setting and select the default, press the [Reset] key.
The center folding position is adjusted.
If the folding position was at the center of the paper in step 7, this
completes the procedure.
9
Use the "Half-Fold" setting to print another sample copy.
10
Check the print result.
–
Check that the folding position is adjusted to the center of the
paper.
–
If more adjustment is necessary, repeat steps 6 through 9.
Tri-Fold Position Adjustment
The folding position when printing with the "Tri-Fold" setting can be adjusted
for each paper size.
Note
[Tri-Fold Position Adjustment] does not appear if optional Finisher FS-
608 is not installed.
0 Before making any adjustments, use the "Tri-Fold" setting to print a
single sample copy. Perform the adjustment while checking the sample
that was created.
1
Display the Administrator Settings screen.
C550
11
11-73