Utility mode
1
Display the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-51.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [2 Center Staple Position].
The Center Staple Position screen appears.
6
Touch the button for the paper size to be adjusted.
–
If the paper size to be adjusted is not displayed, touch [↑] and [↓]
until the desired paper size is displayed.
7
Compare the width of the left pages of the copy sample with the width
of the right pages to check for the center of the paper.
–
If the staple position is too far to the left of the center of the paper,
touch [+] to increase the adjustment (between 0.1 mm and 12.7
mm).
C550
11
11-69