Konica Minolta bizhub C550 User Manual page 35

Before making copies
No. Part name
4 Working table WT-502
5 Fax multi line ML-501
6 Image controller IC-409
7 Large capacity unit LU-301
8 Z folding unit ZU-603
9 Finisher FS-517/FS-518
10 Finisher FS-608
11 Punch kit PK-512
12 Post inserter PI-503
13 Output tray OT-503
14 Video interface kit VI-504*
15 Fax kit FK-502*
16 Stamp unit SP-501*
17 Scan accelerator kit SA-501*
18 Security kit SC-503*
19 Local interface kit EK-603*
C550
Description
Provides an area to temporarily place a document or
other materials. This is also used when the authenti-
cation unit is installed.
Installed to increase the telephone lines available for
faxing.
Allows this machine to be used as a color printer
configured into a computer network. For details, re-
fer to the corresponding User's Guide.
Can be loaded with up to 3,000 sheets of plain A4-
size paper.
Can be loaded with the following A4-size paper:
2,500 sheets of thick paper 1, 1,750 sheets of thick
paper 1+, 1,550 sheets of thick paper 2 or 1,300
sheets of thick paper 3.
Referred to as the "LCT" throughout the manual.
Carries out Z-folding or punching by being installed
on the finisher.
Feeds out finished printed pages. The "Sort" setting
(separating by copy set), "Group" setting (separating
by page), and Staple settings ("Corner" and "2 Posi-
tions") are available.
Feeds out finished printed pages. The "Sort" setting
(separating by copy set), "Group" setting (separating
by page), Staple settings ("Corner" and "2 Position"),
"Half-Fold", "Center Staple & Fold", and "Tri-Fold"
are available.
Installed onto the finisher to allow hole punching to
be used.
Adds cover pages to copies when installed on the
finisher. In addition, this option allows the finisher to
be operated manually.
Collects printed pages.
1
Used for connecting the image controller to the ma-
chine.
1
Allows this machine to be used as a fax machine.
1
Applies a stamp to documents that have been
scanned.
For details, refer to the User's Guide [Fax Opera-
tions].
1
Creates images at high speed when sending scans.
1
Installed to encode the entire data saved on the hard
disk. Even if an unexpected accident such as hard
disk theft occurs, encoded data in the hard disk is
protected against disclosure.
1
Used for connecting the authentication unit (biomet-
ric type), the authentication unit (IC card type) and
external memory (USB memory).
1
1-3