Konica Minolta bizhub C550 User Manual page 401

Copy paper/original documents
4
Touch [Custom Size].
The Custom Size screen appears.
5
Type in the length (X) and width (Y) of the paper.
– Make sure that [X] is selected, and then use the keypad to type in
the length of side X (between 139.7 mm and 457.2 mm).
– Touch [Y] to select it, and then use the keypad to type in the length
of side Y (between 90.0 mm and 311.1 mm).
– If a value outside the allowable range is specified, the message "In-
put error" appears. Type a value within the allowable range.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
To cancel changes to the settings, touch [Cancel].
? Can paper sizes be stored?
% Five non-standard paper sizes can be stored.
% To recall a stored paper size, touch the corresponding memory key.
C550
6
6-14