Konica Minolta bizhub C550 User Manual page 731

Utility mode
– If the folding position is too far on the right side of the paper, touch
[-] under "Adjust Value" to increase the adjustment (between -0.1
mm and -12.8 mm).
– Adjust values so that the distance between the left edge of the pa-
per and the 2nd Z-folding position is 2 mm or more.
8
Touch [OK].
– To cancel the setting and select the default, press the [Reset] key.
The folding positions are adjusted.
If no adjustment of the folding positions were necessary in step 7, this
completes the procedure.
9
Use the "Z-Fold" setting to print another sample copy.
C550
1st Z-fold position
2nd Z-fold position
2 mm or more
11
11-92