Interrupting A Copy Job (Interrupt Mode) - Konica Minolta bizhub C550 User Manual

Additional copy operations
3.4

Interrupting a copy job (Interrupt mode)

The current jobs can be temporarily interrupted so a document can be cop-
ied with different copy settings.
This is convenient for quickly making a copy.
!
Detail
For details on making a copy after printing of the current job is finished,
refer to "Increasing printing priority" on page 10-17.
1
Position the document to be copied.
– For details on loading the document, refer to "Feeding the docu-
ment" on page 2-8.
2
Press the [Interrupt] key.
– If a job is being print-
ed, the message
"The job is stop-
ping." appears.
The indicator on the [In-
terrupt] key lights up in
green and printing of the
current job stops.
What settings are se-
?
lected when the [In-
terrupt] key is
pressed?
% When the [Interrupt]
key is pressed, all functions and settings are reset to their defaults.
Why is the [Interrupt] key not available?
?
% The [Interrupt] key cannot be pressed while an original is being
scanned.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing for the interrupting job begins.
5
After the interrupting job has finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off.
The copy settings return to those specified before printing was inter-
rupted.
C550
3
3-18