Konica Minolta bizhub C550 User Manual page 664

Utility mode
Parameter
Auto Zoom For Com-
bine/ Booklet
Auto Sort/Group Se-
lection
Default Copy Settings
Default Enlarge Display
Settings
When AMS Direction is
Incorrect
C550
Description
Select whether or not the preset zoom ratios are
automatically selected when the "Auto" Paper set-
ting is selected and a combined copy setting or the
"Booklet" function is selected.
• Auto Display Zoom Ratio:
The following zoom ratios are specified.
2in1, Booklet: 70.7%
4in1: 50.0%
8in1: 35.3%
• Off:
The zoom ratio is not selected automatically.
Select whether or not the "Sort" setting is auto-
matically selected when 2 or more copies are set
to be printed in a single job.
• Yes:
When a document is loaded into the automatic
document feeder and the [Start] key is pressed,
the "Group" setting is automatically selected if
the document consists of only one page, and
the "Sort" setting is automatically selected if the
document consists of two or more pages.
• No:
The "Sort" or "Group" setting is not selected
automatically.
Specify the default settings for Copy mode.
The copy settings selected when the machine is
turned on (the power switch is set to "n") or the [Re-
set] key is pressed can be specified.
• Current Settings:
The settings specified from the touch panel
before Utility mode was entered are set as the
default settings for Copy mode.
• Factory Default:
The factory default settings are set as the
default settings for Copy mode.
Specify the default copy settings for the Enlarge
Display mode.
This parameter appears if the machine had previ-
ously entered the Enlarge Display mode of Copy
mode.
• Current Setting:
The settings specified from the touch panel be-
fore Utility mode was entered are set as the de-
fault settings for Copy mode.
• Factory Default:
The factory default settings are set as the de-
fault settings for Copy mode.
Select whether or not printing continues when the
paper and document orientations are different with
the "Auto Zoom" setting selected.
• Print:
The Zoom setting is automatically set and the
copy is printed on paper of the specified size in
the specified orientation.
• Delete Job:
The job is deleted, and no copies are printed.
11
Default Setting
Auto Display Zoom
Ratio
Yes
Factory Default
Factory Default
Print
11-25