Selecting Finishing Settings - Konica Minolta bizhub C550 User Manual

Hide thumbs Also See for bizhub C550:

Table of Contents

Basic copy operations

Selecting Finishing settings

Various settings can be selected for sorting and finishing copies fed into the

copy output tray.

When loading the original into the ADF, copies will be produced accord-

ing to the specified finishing method after every page of the original has

been scanned, regardless of whether [Sort] or [Group] is selected as the

finishing type.

When placing the original on the original glass, copies are produced as

follows according to whether [Sort] or [Group] is selected as the finishing

After all pages of the original have been scanned, copies will be produced

so that one copy of every page will be bundled together as one copy. For

details on placing the original, refer to "Scanning a multi-page document

from the original glass" on page 2-17.

Each time one page of the original is scanned, the specified number of

copies will be produced for that page.

As the factory default, "Group" is selected.

If no finisher is installed and all of the following conditions are met, print-

ed copies are fed out and sorted in an alternating crisscross pattern.

A4- or B5-size paper is used.

Paper of the same size and type is loaded with the w orientation in one

paper tray and with the v orientation in another tray.

The "Auto" Paper setting is selected.

The "Auto" Paper setting is not selected when the "Mixed Original" set-

ting is selected.