Enable Or Disable Port Gvrp; Modify Static Vlan - ZyXEL Communications VES-1616F-44 User Manual

The following example sets ports 1 to 5 to accept only tagged frames.
sysname(config)# interface port-channel 1-5
sysname(config-interface)# frame-type tagged

34.3.3 Enable or Disable Port GVRP

Use the
gvrp
GVRP.
The following example turns off GVRP for ports 1 to 5.
sysname(config)# interface port-channel 1-5
sysname(config-interface)# no gvrp

34.3.4 Modify Static VLAN

Use the following commands in the
Syntax:
vlan <vlan-id>
fixed <port-list>
forbidden <port-list>
name <name-str>
normal <port-list>
untagged <port-list>
no fixed <port-list>
no forbidden <port-list>
no untagged <port-list>
where
<vlan-id>
<name-str>
<port-list> =
• Enter
fixed
• Enter
normal
<vlan-id>
• Enter
forbidden
<vlan-id>
• Enter
no fixed
• Enter
untagged
• Enter
no untagged
Chapter 34 IEEE 802.1Q Tagged VLAN Commands
command to enable GVRP on the port(s). Use the
config-vlan
The VLAN ID [1 – 4094].
=
A name to identify the SVLAN entry.
=
This is the switch port list.
to register the
<port-list>
to confirm registration of the
.
to block a
<port-list>
.
or
no forbidden
to send outgoing frames without a tag.
to tag outgoing frames.
VES-1616F/1624F-44 User's Guide
no gvrp
mode to configure the static VLAN table.
to the static VLAN table with
to the static VLAN table with
<port-list>
from joining the static VLAN table with
to change
<port-list>
command to disable
.
<vlan-id>
to normal status.
263