Link Aggregation Setup; Figure 47 Link Aggregation Control Protocol: Configuration; Table 35 Link Aggregation Control Protocol: Status - ZyXEL Communications VES-1616F-44 User Manual

The following table describes the labels in this screen.

Table 35 Link Aggregation Control Protocol: Status

LABEL
Index
Aggregator ID
Enabled Port
Synchronized
Ports
Poll Interval(s)
Stop

14.3 Link Aggregation Setup

Click Configuration in the Link Aggregation Control Protocol Status screen to display the
screen shown next.
See Section 14.1 on page 109

Figure 47 Link Aggregation Control Protocol: Configuration

Chapter 14 Link Aggregation
DESCRIPTION
This field displays the trunk ID to identify a trunk group, that is, one logical link
containing multiple ports.
This field displays the link aggregation ID. Link aggregation ID consists of the
following: system priority, MAC address, key, port priority and port number.
Refer to Section 14.1.2 on page 110
These are the ports you have configured in the Link Aggregation screen to be in the
trunk group.
These are the ports that are currently transmitting data as one logical link in this trunk
group.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Set
Interval.
Click Stop to halt statistic polling.
for background information.
VES-1616F/1624F-44 User's Guide
for more information on this field.
111