VES-1616F/1624F-44 User's Guide
Figure 7 Transceiver Installation Example
2 Press the transceiver firmly until it clicks into place.
3 The switch automatically detects the installed transceiver. Check the LEDs to verify that
it is functioning properly.
Figure 8
Installed Transceiver
3.1.5.2 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module).
1 Open the transceiver's latch (latch styles vary).
Figure 9 Opening the Transceiver's Latch Example
2 Pull the transceiver out of the slot.
40
Chapter 3 Hardware Overview