Rmt-Vtur Commands - ZyXEL Communications VES-1616F-44 User Manual

32.11.6 rmt-vtur Commands

The following table lists the
Table 87 rmt-vtur Commands
COMMAND
rmt-vtur port-
channel <port-
list>
exit
layer2-setting
mnt
port-based
port-config
Chapter 32 Introducing the Commands
commands in the
rmt-vtur
bcaststorm
<0|1|2|3>
commit
igmp-snooping
<enable|disabl
e>
status
unknown-mcast
<0 |1>
vlan-type
<802.1q|port-
based>
commit
load-default
reset
status
commit
port-index
<1~4> member
<port-list>
status
VES-1616F/1624F-44 User's Guide
command mode.
enable
DESCRIPTION
Enters the remote CPE configuration
mode
Exits from the remote CPE
configuration mode.
Sets broadcast storm control settings
on the CPE device.
0 = disable
1 = 1500/15000 pps
2 = 3000/30000 pps
3 = 6000/60000 pps
Saves the settings for this command
group to the CPE device.
Activates or deactivates IGMP snooping
on the CPE device.
Checks command status for layer2
settings.
Sets the action know unknown multicast
packets on the CPE device.
0 = drop packets
1 = forward packets
Sets the VLAN type on the CPE device. 13
Saves the settings for this command
group to the CPE device.
Sets the CPE device back to the factory
defaults.
Restarts the CPE device.
Checks command status for CPE
device maintenance settings.
Saves the settings for this command
group to the CPE device.
Sets the VLAN port member.
Checks the command status for port-
based VLAN settings.
P
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
233