ZyXEL Communications VES-1616F-44 User Manual page 227

VES-1616F/1624F-44 User's Guide
Table 84 Command Summary: Configuration Mode (continued)
COMMAND
spanning-tree
<port-list>
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-30>
help
priority <0-61440>
spq
ssh known-hosts <host-ip>
<1024|ssh-rsa|ssh-dsa>
<key>
storm-control
syslog
server <ip-adderss>
type <type>
226
enable traps
interface [linkup|
linkdown|
autonegotiation]
enable traps help
enable traps ip
[ping|traceroute]
enable traps switch
[stp|
mactable|rmon]
enable traps system
[coldstart|
warmstart| reset
|timesync]
path-cost <1-65535> Sets the STP path cost for a
priority <0-255>
inactive
level [0 ~ 7]
facility [local 1
..7]
Chapter 32 Introducing the Commands
DESCRIPTION
Enables sending of the
interface category's SNMP
traps to the SNMP station.
Displays command
information.
Enables sending of the IP
category's SNMP traps to the
SNMP station.
Enables sending of the switch
category's SNMP traps to the
SNMP station.
Enables sending of the system
category's SNMP traps to the
SNMP station.
Enables STP on the switch.
Enables STP on a specified
port.
specified port.
Sets the priority for a specified
port.
Sets Hello Time, Maximum Age
and Forward Delay.
Displays command help
information.
Sets the bridge priority of the
switch.
Sets the switch to use Strictly
Priority Queuing (SPQ).
Adds a remote host to which
the switch can access using
SSH service.
Enables broadcast storm
control on the switch.
Enables syslog logging.
Disables syslog logging to the
specified syslog server.
Sets the IP address of the
syslog server and the severity
level.
Sets the log type.
Sets the log type and the file
location on the syslog server.
P
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13