Table 17 Vdsl Alarm Profile Setup - ZyXEL Communications VES-1616F-44 User Manual

VES-1616F/1624F-44 User's Guide
The following table describes the labels in this screen.

Table 17 VDSL Alarm Profile Setup

LABEL
Name
15 Minute LOFs
Threshold
15 Minute LOSs
Threshold
15 Minute LPRs
Threshold
15 Minute LOLs
Threshold
15 Minute ESs
Threshold
15 Minute SESs
Threshold
15 Minute UASs
Threshold
Initialization
Failure
Add
Cancel
Clear
Name
LOSs
ESs
SESs
Init
Applied Ports
Delete
Cancel
78
DESCRIPTION
Enter a descriptive name for identification purposes.
Enter the number of Loss Of Framing seconds(LOFs) that are permitted to occur
within 15 minutes.
Enter the number of Loss Of Signals seconds(LOSs) that are permitted to occur
within 15 minutes.
Enter the number of times a Loss of PoweR seconds(LPRs) is permitted to occur
within 15 minutes.
Enter the number of Loss Of Link seconds(LOLs) that are permitted to occur within
15 minutes.
Enter the number of Errored Seconds (ESs) that are permitted to occur within 15
minutes.
Enter the number of Severely Errored Seconds (SESs) that are permitted to occur
within 15 minutes.
Enter the number of UnAvailable Seconds (UASs) that are permitted to occur
within 15 minutes.
Select On to trigger an alarm for an initialization failure trap.
Select Off to disable trap sending when a line fails to initialize.
Click Add to save the new rule to the switch. It then displays in the summary table
at the bottom of the screen.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
This field displays the descriptive name for the alarm profile.
This field displays the number of Loss Of Signal (LOS) seconds that are permitted
to occur within 15 minutes.
This field displays the number of Errored Seconds (ESs) that are permitted to occur
within 15 minutes.
This field displays the number of Severely Errored Seconds (SESs) that are
permitted to occur within 15 minutes.
This field displays whether the initialization failure trap sending feature is enabled
(On) or not (Off).
You can apply a profile to a VDSL profile in the Port Setup screen.
This field displays the VDSL port number(s) to which this profile is applied.
Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Click Cancel to clear the selected checkboxes in the Delete column.
Chapter 6 Basic Setting