The Login Screen; Command Syntax Conventions; Getting Help - ZyXEL Communications VES-1616F-44 User Manual

VES-1616F/1624F-44 User's Guide

32.3 The Login Screen

After you have successfully established a connection to the switch using a direct console
connection or Telnet, a login screen displays. The following figure shows an example. For
your first login, enter the default administrator login username "admin" and password "1234".

32.4 Command Syntax Conventions

The rules of the commands are listed next.
• The command keywords are in
• The required fields in a command are enclosed in angle brackets <>, for instance,
means that you must specify an IP number for this command.
<ip>
• The optional fields in a command are enclosed in square brackets [], for instance,
means that the
• "Command" refers to a command used in the command line interface (CI command).
• The | symbol means "or".
• The entry
return after a command to execute the command.
• Use the up ( ) or down ( ) arrow key to scroll through the command history list.
• The CLI does not accept partial or incomplete commands. You may enter a unique part of
a command and press
For example, if you enter "
automatically displays.
• Each interface refers to a port on the switch. Commands configured after the interface
command correspond to the port.
• Type multiple ports or port ranges separated by a comma. Ranges of port numbers are
typed separated by a dash.

32.5 Getting Help

The system includes a help facility to provide you with the following information about the
commands:
• List of available commands under a command group.
• Detailed descriptions of the commands.
206
Enter User Name : admin
Enter Password : XXXX
courier new
configure snmp-server [contact <system contact>] [location
<system location>]
and
contact location
in the command lines refers to carriage return. Press
<cr>
to have the switch automatically display the full command.
[TAB]
config
font.
fields are optional.
" and press , the full command of "
[TAB]
Chapter 32 Introducing the Commands
ping
or carriage
[ENTER]
"
configure