Enable Or Disable Port Gvrp; Modify Static Vlan; Figure 168 Frame Type Command Example; Figure 169 No Gvrp Example - ZyXEL Communications ZyXEL Dimension ES-4024 User Manual

ES-4024A User's Guide
This command sets the specified port to accept all Ethernet frames or only those with an IEEE
802.1Q VLAN tag.
The following example sets ports 1 to 5 to accept only tagged frames.

Figure 168 frame type Command Example

ras (config)# interface port-channel 1-5
ras (config-interface)# frame-type tagged

39.5.3 Enable or Disable Port GVRP

Use the
gvrp
GVRP.
The following example turns off GVRP for ports 1 to 5.

Figure 169 no gvrp Example

ras (config)# interface port-channel 1-5
ras (config-interface)# no gvrp

39.5.4 Modify Static VLAN

Use the following commands in the config-vlan mode to configure the static VLAN table.
Syntax:
where
<vlan-id>
<name-str>
<port-list> =
• Enter
fixed
• Enter
normal
<vlan-id>
250
command to enable GVRP on the port(s). Use the
vlan <vlan-id>
fixed <port-list>
forbidden <port-list>
name <name-str>
normal <port-list>
untagged <port-list>
no fixed <port-list>
no forbidden <port-list>
no untagged <port-list>
The VLAN ID [1 – 4094].
=
A name to identify the SVLAN entry.
=
This is the switch port list.
to register the
<port-list>
to confirm registration of the
.
no gvrp
to the static VLAN table with
to the static VLAN table with
<port-list>
Chapter 39 IEEE 802.1Q Tagged VLAN Commands
command to disable
.
<vlan-id>