Ip Setup; Management Ip Address; Figure 25 Ip Setup; Table 13 Ip Setup - ZyXEL Communications VES-1616F-44 User Manual

VES-1616F/1624F-44 User's Guide

6.6 IP Setup

Use the IP Setup screen to configure the default gateway device, the management IP address
and the default domain name server.

6.6.1 Management IP Address

The switch needs an IP address for it to be managed over the network. The factory default in-
band IP address is 192.168.1.1 and out-of-band management IP is 192.168.0.1. The subnet
mask specifies the network number portion of an IP address. The factory default subnet mask
is 255.255.255.0.
You can configure up to 128 IP addresses which are used to access and manage the switch
from the ports belonging to the pre-defined VLAN(s).
Note: You must configure a VLAN first.

Figure 25 IP Setup

The following table describes the labels in this screen.

Table 13 IP Setup

LABEL
Domain Name
Server
In-band Management IP Address
DHCP Client
Static IP
Address
IP Address
68
DESCRIPTION
Enter the IP address of the domain name server in dotted decimal notation, for
example 192.168.1.20.
Select this option if you have a DHCP server that can assign the switch an IP
address and subnet mask, a default gateway IP address and a domain name server
IP address.
Select this option if you don't have a DHCP server or if you wish to assign static IP
address information to the switch. You need to fill in the following fields when you
select this option.
Enter the IP address of your switch in dotted decimal notation for example
192.168.1.1.
Chapter 6 Basic Setting