This chapter explains the Diagnostic screen.
28.1 Diagnostic
Click Management, Diagnostic in the navigation panel to open this screen. Use this screen to
check system logs, reset the system or ping IP addresses.
Figure 102 Diagnostic
The following table describes the labels in this screen.
Table 75 Diagnostic
LABEL
System Log
IP Ping
Port Test
Chapter 28 Diagnostic
DESCRIPTION
Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the syslog entry.
Type the IP address of a device that you want to ping in order to test a connection.
Click Ping to have the switch ping the IP address (in the field to the left).
From the Port drop-down list box, select a port number and click Internal Test to
perform internal loopback test or click External Test (on VDSL ports) to perform
loopback test to the remote devices.
VES-1616F/1624F-44 User's Guide
C
H A P T E R
Diagnostic
2 8
193