ZyXEL Communications VES-1616F-44 User Manual page 220

Table 84 Command Summary: Configuration Mode (continued)
COMMAND
mvid <vid>
name-server
outband
route<ip> <mask> <next-
hop-ip>
lacp
system-priority
loginPrecedenc <LocalOnly |
e LocalRADIUS |
RADIUSOnly>
logins username <name>
logout
mac-aging-time
<10-3000>
mac-filter name <name> mac <mac-
addr> vlan <vlan-id>
drop <src/dst/both>
mac-forward name <name> mac <mac-
addr> vlan <vlan-id>
interface <interface-
id>
mirror-port
<port-num>
mode zynos
Chapter 32 Introducing the Commands
VES-1616F/1624F-44 User's Guide
client
[release|renew]
default-gateway
<ip>
<ip>
address <ip> <mask> Sets the management IP
[metric <metric>]
[name <name>]
[inactive]
<1-65535>
password <pwd>
privilege <0-14>
inactive
inactive
DESCRIPTION
Sets the inband management
interface as a DHCP client.
Sets the default gateway's IP
address.
Sets the IP address of a
domain name server.
address and subnet mask for
the out-of-band management
port.
Creates a static route.
Sets the metric of a static route
or deactivates a static route.
Enables Link Aggregation
Control Protocol (LACP).
Sets the priority of an active
port using LACP.
Select which database the
switch should use (first) to
authenticate a user.
Configures up to four read-only
login accounts.
Sets the access privilege for
the existing login accounts.
The higher the value, the more
commands are allowed.
Exits from the CLI.
Sets learned MAC aging time.
Configures a static MAC
address port filtering rule.
Disables a static MAC address
port filtering rule.
Configures a static MAC
address forwarding rule.
Disables a static MAC address
forwarding rule.
Enables port mirroring.
Sets a monitor port.
Changes the CLI mode to the
ZyNOS format.
P
13
13
13
13
13
13
13
13
13
14
14
14
13
13
13
13
13
13
13
13
13
219