Disabling New Logins; Upgrading The Software; Figure 8 Disable New Logins - Nortel NN46110-602 Troubleshooting Manual

60 Chapter 3 Administrative tasks

Disabling new logins

You can prevent clients from connecting to the VPN Router without affecting the
users currently connected by using this feature to disable new logins. When new
logins is disabled, no new IPsec connections are established.
To disable new logins:
1
2

Figure 8 Disable new logins

To disable new logins using the CLI, enter the following command:
CES# reload [at <hh:mm>] [boot-drive] [boot-normal | boot-safe]
[config-file] [power-off | restart] disable-logins

Upgrading the software

To upgrade the VPN Router, download the latest Nortel software using the File
Transfer Protocol (FTP). Because FTP servers are often different, check your
server documentation for information about setting paths that can help you with
the upgrade procedure.
You can download the latest software from:
NN46110-602
Select Admin > Shutdown.
Click Disable new logins.
If you do not want to reboot the switch after you disable new logins, click
None in the System Shutdown section.
(Figure 8)