Table of Contents
Advertisement
SNMP Configuration
The SNMP Configuration screen
SNMP configuration parameters.
Choose SNMP Configuration (or press m) from the main menu to open the SNMP
Configuration screen.
Read-Only Community String:
Read-Write Community String:
Trap #1 IP Address:
Community String:
Trap #2 IP Address:
Community String:
Trap #3 IP Address:
Community String:
Trap #4 IP Address:
Community String:
Authentication Trap:
Link Up/Down Trap:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Figure 3-4.
SNMP Configuration Screen
Table 3-3
Table 3-3.
SNMP Configuration Screen Fields
Field
Read-Only
Community String
302401-D Rev 00
SNMP Configuration
[ public ]
[ private ]
[ 0.0.0.0 ]
[
[ 0.0.0.0 ]
[
[ 0.0.0.0 ]
[
[ 0.0.0.0 ]
[
[ Enabled
[ Enabled
describes the SNMP Configuration screen fields.
Description
The community string used for in-band read-only SNMP operations.
Default Value
public
Range
Any ASCII string of up to 32 printable characters
(Figure
3-4) allows you to set or modify the
]
]
]
]
]
]
Press Ctrl-C to return to Main Menu.
Using the Console Interface
3-13
Advertisement
Chapters
Table of Contents
