Omron CS CJ1W-ETN21 Operation Manual page 71

Remote Mail Command Details
UMBackup (User Memory Backup)
Function
Command Format Details
Subject: UMBackup
Body: Para1:Destination folder
name
Example)
Specifying subdirectory OMRON in
the Memory Card:
Para1:MEMCARD\OMRON
Para2:File name
Example)
Specifying USER.OBJ:
Para2:USER.OBJ
Para3:Overwrite=OK or NG
Example)
Allowing existing file to be overwrit-
ten:
Para3:Overwrite=OK
Attached file: None
Response Format
Subject: Re:UMBackup
Body: Response Code:@@@@
Response Status:@@@@
> Para1:Destination folder name
> Para2:File name
> Para3:Overwrite=OK or NG
Attached file: None
Backs up (saves) the CPU Unit's user program in the CPU Unit's EM file
memory or a Memory Card mounted in the CPU Unit.
Notation
Specifies the destination folder in
which the user program will be
saved.
• MEMCARD specifies the Memory
Card's root directory.
• EM specifies the EM file memory's
root directory.
Note If this parameter is omitted,
Specifies the name of the file in
which the user program data will be
saved.
Note If this parameter is omitted,
Specifies whether or not an existing
file may be overwritten.
• To allow an existing file with the
same filename to be overwritten,
enter "Overwrite=OK".
• To prevent an existing file with the
same filename from being overwrit-
ten, enter "Overwrite=NG".
Note If this parameter is omitted,
Response contents
Description
the default destination is the
Memory Card's root directory.
the default file name is
AUTOEXEC.OBJ.
overwriting is prohibited.
Refer to 3-4-2 Response List.
Refer to 3-4-2 Response List.
Included only if this parameter was specified.
Included only if this parameter was specified.
Included only if this parameter was specified.
Section 3-4
Omission
Can be omitted.
Can be omitted.
Can be omitted.
Description
47