Error Log Error Codes For The Automatic Clock Adjustment Function - Omron CS CJ1W-ETN21 Operation Manual

Automatic Clock Adjustment Error Processing
Note
5-4-3 Error Log Error Codes for the Automatic Clock Adjustment
Function
For details on other error log information, refer to the Operation Manual, Con-
struction of Networks: SECTION 8 Troubleshooting.
When an error occurs while the Ethernet Unit is operating, the error code,
detailed error code, and time the error occurred are saved in the error log.
The following table provides a list of the error codes.
The error log can be read by sending FINS commands to the Ethernet Unit or
by using the mail receive function and specifying the ErrorLogRead com-
mand.
Error Meaning
code
1st byte
021A Logic error 00
in setting
table
03C1 Server set- 00: DNS
ting error 01: SMTP
02: POP3
03: SNTP
03C4 Server 00: DNS
connection
01: SMTP
error
02: POP3
03: SNTP
Detailed error code
2nd byte
01: Data link Recreate the data
table specified by the
2nd byte of the
02: Network
detailed error
parameters
code.
03: Routing
tables
04: Setup
05: CPU Bus
Unit Words
(CIO/DM)
01: IP address Set the server
settings correctly
02: Host name
based on the
03: Port number
information in the
04: Other
detailed error
parameters
code.
01: Specified Take either of the
host does not following mea-
exist sures.
02: No service • Correct the set-
at specified host
03: Timeout
• Inspect the com-
04: Closed uni-
laterally by host
05: Cannot con-
nect because
account infor-
mation does not
match
06: Host name
resolution error
07: Transmis-
sion error
08: Reception
error
09: Other error
Section 5-4
Correction EEPROM
Saved
---
---
tings for each
server.
munications
path (Ethernet
Unit, cable con-
nections, hub,
router, server),
and correct the
situation that is
causing the
error.
95